Auto Detailing / Auto detailing Premium

 

Auto detailing Premium

is the most developed and thus the most prestigious package of detailing services offered by our studio. It is dedicated to those customers who want their car to look better than at the moment of leaving the showroom doors.

 

The package includes the following processes:

 

- Initial wash (contactless)

It consists of the coverage of vehicle with active PH-neutral foam safe for paint, rubber and plastics, which is aimed at removing the top layer of dirt to minimize the risk of scratching the paint during the washing by hand. After a few minutes, active foam with dirt is rinsed from the car body by means of water under pressure.

 

- Cleaning proper (manual)

This is the safest way to wash your vehicle by using a very soft microfiber gloves or natural sheep wool and two buckets (one containing a solution of water and car shampoo with a neutral pH, while the other contains only water for rinsing the glove from dirt collected from the car body) equipped with inserts of Grit Guard type, retaining pollution at the bottom of the bucket.

Cleaning the wheels

 

In case of this package of services, the wheels are taken off the car, in order to thoroughly clean and protect their inner side. We clean rims using the agents which are matched to their type (lacquered, polished, chromed, etc.) and safe for their trim, effectively eliminating dirt, using the appropriate brushes with soft bristles safe for their surface. All traces of tar and residues of glue from old weights are removed.

 

- Cleaning of inner wheel arches, wheel houses, etc.

With this package of services, the whole inner wheel arches are cleaned carefully after the wheels are taken off. All seals, cracks and recesses (grills etc.) are cleaned by applying special agents and brushes with soft bristles.

 

- Decontamination (removal of contaminants strongly adhering to the paint)

This stage consists of the removal of traces of tar from paint with a specially adapted agent. Then, the clay bar is used in order to remove the contaminants strongly adhering to the paint, tree sap, insect residues, metal contaminants, etc. leaving the paint perfectly clean and smooth.

 

- Correction of the paint

Multi-stage process of polishing the paint with a professional polishing machine and carefully selected polishing pastes and pads adjusted to specific paint and its condition.

Correction of paint aims at removing all possible to eliminate defects and damages located in the coat of paint, such as scratches, abrasions, tarnishing, small pitting, etc. This process is carried out with great care and attention to remove the thinnest layer of paint to be able to remove the newly created imperfections in the future. During this process we remove the damaged layer of lacquer having a thickness of about 3-5 microns, which is a very small part of the entire thickness of the paint oscillating usually within a range from 110 to 180 microns.

 

- Preparation of lacquer for protection

After the paint correction process, it is carefully cleaned of any residues of polishing pastes and then the specific agent is of pre-wax cleaner type aimed at making the lacquer look as good as possible and prepare the surface for the application of final protection in the form of wax, maximizing at the same time its durability.

 

- Protection of lacquer

This process involves the manual application of the highest quality natural wax, based only on natural ingredients such as fruit oils, carnauba wax etc.

It is intended to provide exceptional look and high gloss and depth of color of the lacquer, as well as protection against the harmful effects of external factors and weather conditions.

 

- Protection of wheels

Rims are covered, from both the outside and inside, with a layer of special synthetic wax, resistant to high temperatures and providing the rims with perfect appearance. It also slows down the process of soiling of rims because e.g. the adhering of dust from brake shoes to its surface is much more difficult and it is easier to clean them.  

Application of hydrophobic coating on glass

All windows of the vehicle, after cleaning, are covered with a layer of hydrophobic coating on the outside providing water repulsion. Therefore, when driving in the rain at speed above ~ 60 km / h, using the wiper becomes unnecessary because the water is collected in drops and, with the momentum of the air flowing over the vehicle, they are drained from the windscreen. This coating also causes the glass to soil at a slower rate.

 

Application of dressings on tires and plastic elements

The tires and plastic elements are covered with dressings aimed at smartening up the materials and restoring their fresh look and giving protection from UV rays.

 

- Cleaning the inside

The interior of the vehicle: all fitted carpets, seats and boot are thoroughly vacuumed. All plastic interior elements and rubber floor mats (if any) are thoroughly cleaned and restored.

All corners are cleaned by means of special brushes with soft bristles.

 

Headliner, fitted carpets, fabric upholstery and velour floor mats (if any) are thoroughly washed in the extractive manner by means of special agents which are safe for the materials.

The leather upholstery is thoroughly cleaned by means of soft, completely safe agents. Then, the nutrient is applied aimed at restoring its natural softness and  fresh look and protection against dirt and discolouration.

 

 

Duration of works: about 5 working days